Wait Before Rolling Down Windows
- Wait time: After installation, avoid rolling down your windows for at least 3-4 days. This gives the tint time to properly cure and bond to the glass.
- Reason: The adhesive used to apply the tint needs time to fully dry and set. Rolling the windows down too soon can cause the film to peel or wrinkle.
Cleaning the Tinted Windows
- Wait a week for cleaning: Avoid cleaning the windows for at least 1 week after installation.
- Cleaning products: Use mild, non-abrasive cleaners (preferably ammonia-free). Avoid using cleaners that contain alcohol or ammonia as these can damage the tint.
- Cleaning tools: Use a soft microfiber cloth to clean the windows. Avoid rough or abrasive materials that could scratch the film.
- Technique: When cleaning, gently wipe in a circular motion, and don’t press too hard on the surface.
Protect from Abrasive Materials
- Be careful with sharp objects: Be cautious not to scrape or scratch the tinted windows with hard or sharp objects, including keys, tools, or rough cleaning pads.
- Avoid excessive pressure: Pressing hard on the windows, especially during cleaning, can damage the tint film.
Watch for Bubbles
- Small bubbles: After installation, small bubbles may appear under the tint. These should disappear naturally within a few days to a week as the adhesive cures. However, if bubbles persist after a week, contact us for a check up.
